Tubing Uncoiler – USB-2-6C

Tubing Uncoiler - USB-2-6CThe function of the tubing uncoiler USB-2-6C stand is to provide a smooth and even flow of tubing. Also, during the feed cycle with controlled deceleration at the termination of the feed stroke.

The tubing uncoiler stand will consist of one or more pairs of coil positions on opposed sides of the stand’s frame. In addition, each position will incorporate a spindle-mounted cast aluminum uncoiler hub. Also, with the axis of the spindles being in the horizontal plane. All positions will incorporate a friction brake to prevent backlash and provide some deceleration.

USB-2-6C Model

The coil reels are securely retained on the uncoiler USB-2-6C hub by means of a pointed stud on the inside face of the hub’s flange. The standard uncoiler hub is designed for a 5″(127mm) diameter hole in the corrugated paper reel; however, special diameter hubs are available.

The standard uncoiler stand will accept a maximum reel flange diameter of 42/44″ (107/112cm), a maximum width over the flanges of 12/14″ (30/36cm), and a maximum coil weight in excess of 300 pounds (136Kg). For bare tube coils (not reel-mounted) permanent payoff reels are available as an option.

Visit Innovative Automation today for even more machine options.  At Tridan we pride ourselves on our outstanding customer service.  Finally, contact our parts and service department today.