 |
 |
 |
 |
 |
 |
Accessories - Tube Fabrication
- Tube Collector Table - CT
- Tube Trim Saw - TTS
- Tube Uncoiler - USB-2-2C
- Tube Uncoiler - USB-2-2CBP
- Tube Uncoiler - USB-2-4C
- Tubing Uncoiler - USB-2-6C
Hairpin Benders
- AHBH - Automatic Hopper Fed, Long
- AHBM (4 tube)
- AHBM/SL - Bender/Straightener
- AHBQ - Automatic Mandrel Type
- AHBQ/SL - Bender/Straightener
- AHBV (6 tube)
- AHBV/SL - Bender/Straightener
- AHBVB (6 tube, belt fed)
- HBPA (Hand-Fed, Power Assist)
- HBVQ (Hand-Fed, Power Assist)
- MB (Manual Bender)
- Powered Tube Benders - PB-2
Header Machinery
Return Benders
- RBQ - Return Bender
- RBV - Return Bender
- REXQ - Combination Bender
- RSL - Return Bend Sizer & Ring Loader
Tube Straightener/End Forming
- STMBC - End Form / Tube Straighter (Belt Fed)
- STMC - End Form / Tube Straighter (Belt Fed)
- Saw Cutoff - STQS
- Tube End Former - STQC-4W
- Tube Straightener - STQC
- Tube Straightener - STVC
Uncoiler
HBPA (Hand-Fed, Power Assist)
Click picture to enlarge
The Model HBPA Hand Fed Hairpin Bender is one of two hand fed hairpin benders built by TRIDAN® to augment our line of fully automatic hopper and level-wound coil fed hairpin benders. The other hand fed hairpin bender is the Model HBVQ. Both benders were designed to meet and fulfill production requirements of lower-to-moderate volume hairpin production for pre-cut straight tube lengths.
The TRIDAN® Model HBPA Hairpin Bender is a heavy-duty hand fed hairpin bender with its bending function hydraulically powered, automatic internal lubrication of the tube through the bending mandrels, and partial hairpin bend ejection. It is designed for copper and aluminum tubing having outside diameters' between 5/16"(7.94mm) and 3/4"(19.05mm). The HBPA bends three (3) hairpins per cycle on tube diameters between 5/16"(7.94mm) and 1/2"(12.7mm), two (2) per cycle with 5/8"(15.9mm) OD, and one (1) hairpin per cycle on 3/4"(19.1mm) OD.
